Búsqueda avanzada

MIGUEL ANGEL CATAÑO SANCHEZ

MIGUEL ANGEL CATAÑO SANCHEZ

MIGUEL ANGEL CATAÑO SANCHEZ

Máster Universitario en Automática y Robótica, UNIVERSIDAD POLITECNICA DE CATALUNYA

Ingeniero Electrónico
DOCENTE ORDINARIO - ASOCIADO
Docente a tiempo completo (DTC)
Departamento Académico de Ingeniería - Sección Electricidad y Electrónica

Sumilla

Diseño de Circuitos Electrónicos, así como el análisis de imágenes para el control de procesos.

Correo electrónico
  mcatano@pucp.edu.pe

Publicaciones (16)

Artículos en memoria o anales de congreso (9) | Artículos en revista (4) | Parte o capítulo de libro (3)
ZAMUDIO, M. A.; CARHUAVILCA, A. M.; CONDE, L. A.; GARCIA, M. A.; BERASTAIN, A. E.; Montes, J.; de la Casa, J.; PALOMINO, J. A.; CATAÑO, M. A.(2023). Development of a low-cost monitoring system for the measurement of DC and AC electrical parameters in gridconnected photovoltaic systems based on IEC standards. Journal of Physics: Conference Series. Recuperado de: https://doi.org/10.1088/1742-6596/2538/1/012004
ROJAS, F. J.; ANICAMA, V. M.; DE LA CRUZ, C.; CATAÑO, M. A.; LOAYZA, I.(2021). Estudio numérico del flujo de aire a través de un inyector usando técnicas CFD. En 19th LACCEI International Multi-Conference for Engineering, Education, and Technology. BUENOS AIRES. Latin American and Caribbean Consortium of Engineering Institutions. Recuperado de: https://www.laccei.org/LACCEI2021-VirtualEdition/full_papers/FP31.pdf
CARHUAVILCA, A. M.; CONDE, L. A.; BERASTAIN, A. E.; Montes, J.; Gosgot, W.; de la Casa, J.; PALOMINO, J. A.; CATAÑO, M. A.(2021). Monitoring system based on IEC standards for irradiance and module temperature measurements in photovoltaic systems. Journal of Physics: Conference Series. Recuperado de: https://iopscience.iop.org/article/10.1088/1742-6596/1841/1/012002
Ver todas las publicaciones

Investigaciones (19)

2021 - 2022
Mejora de Proceso para Incrementar la Calidad y Productividad en la Producción de SURIMI de Anchoveta Negra

2019 - 2022
Caracterización, modelado y estudio del comportamiento de diferentes generaciones de tecnologías fotovoltaicas frente a las condiciones climáticas del Perú

2019 - 2022
Desarrollo de un Robot Prototipo que permita Automatizar el proceso de Rulina en la industria del Caucho para la empresa LININGS S.A.

Ver todas las investigaciones

Docencia

Docencia en la PUCP (últimos 2 años)

Pregrado

Estudios Generales Ciencias

1IEE05 - INNOVACIÓN ELECTRÓNICA

Semestre 2023

  • 2023-1

Facultad de Ciencias e Ingeniería

1MTR01 - TRABAJO DE FIN DE CARRERA 1

Semestre 2023

  • 2023-2

Semestre 2022

  • 2022-1

1MTR02 - TRABAJO DE FIN DE CARRERA 2

Semestre 2022

  • 2022-2

IEE239 - PROCESAMIENTO DE SEÑALES E IMÁGENES DIGITALES

Semestre 2024

  • 2024-1

Semestre 2023

  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-1
  • 2022-2

IEE308 - TRABAJO DE TESIS 1

Semestre 2023

  • 2023-1

Semestre 2022

  • 2022-1

IEE309 - TRABAJO DE TESIS 2

Semestre 2023

  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-2

 

Posgrado

Escuela de Posgrado

FIS772 - PROCESAMIENTO DIGITAL DE SEÑALES E IMÁGENES

Semestre 2023

  • 2023-2

Semestre 2022

  • 2022-2

ING606 - SISTEMAS LINEALES

Semestre 2022

  • 2022-1

MIB604 - INSTRUMENTACIÓN BIOMÉDICA

Semestre 2024

  • 2024-1
Ver todos los cursos

Producciones (4)

Productos tecnológicos (4)

VARGAS GUERRA, HERBERT YSAI. (2022). Sistema de Rulinado para Tubería para la empresa LININGS.

CUISANO EGUSQUIZA, JULIO CESAR; CATAÑO SANCHEZ, MIGUEL ANGEL; CARRERA SORIA, WILLY EDUARDO; CHIRINOS GARCIA, LUIS RICARDO. (2015). KIT DE CONVERSIÓN DE MOTORES DIESEL A GAS NATURAL.

CATAÑO SANCHEZ, MIGUEL ANGEL. (2016). Dispositivo control Maestro-Esclavo para el seguimiento del sol de un equipo de espéjos parabólicos.

CATAÑO SANCHEZ, MIGUEL ANGEL; VALLADARES VARGAS, WILLIAN EDGAR; PACHAMANGO MANTILLA, JULIO. (2014). Impreso 3D.

Ver todas las producciones