Búsqueda avanzada

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

Doctor en Ingeniería, PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU

Ver todos los grados

Magíster en Ingeniería Civil (PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU)

Ingeniero Civil
DOCENTE ORDINARIO - ASOCIADO
Docente a tiempo completo (DTC)
Departamento Académico de Ingeniería-Sección Ingeniería de Telecomunicaciones

Publicaciones

Se encontraron 33 publicaciones

NAKAMATSU, J.; ZAVALETA, D. C.; QUISPE, A. R.; ROJAS, O. A. G.; SILVA, G.; KIM, S.; NAKAMATSU, J.; Ruiz, G.; Pando, M. A.; AGUILAR, R.(2025). 3D-printing of a basic housing unit prototype using earthen-based matrices stabilized with rice husk fibers. Journal of Building Engineering. Volumen: 103. (pp. 112111).
CALLE, V. V.; ROJAS, R. D. J.; GUILLEN, K. L.; Pantó, B.; NAKAMATSU, J.; SILVA, G.; CHACARA, C. J.(2024). Use of Organic Residues for the Mechanical Enhancement of Sustainable Rammed Earth. En Second RILEM International Conference on Earthen Construction. (pp. 152 - 161). Springer Cham. Recuperado de: https://doi.org/10.1007/978-3-031-62690-6_3
SILVA, G.; ZAVALETA, D. C.; BERTOLOTTI, B. J.; AGUILAR, R.; Pando, M.; NAKAMATSU, J.; KIM, S.; SILVA, G.(2024). Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D-Printed Earthen Structures. En Second RILEM International Conference on Earthen Construction. (pp. 22 - 31). Springer Cham. Recuperado de: https://doi.org/10.1007/978-3-031-62690-6_3
CARDENAS, K. T.; LE BIENVENU, S. M.; DUNKELBERG, C. F.; NAKAMATSU, J.; KIM, S.; Ruiz, G.; Pando, M.; AGUILAR, R.; SILVA, G.(2024). Development and Characterization of a Printable Concrete Made with Construction and Demolition Waste Aggregates. En Fourth RILEM International Conference on Concrete and Digital Fabrication . (pp. 3 - 10). Springer Nature. Recuperado de: https://link.springer.com/chapter/10.1007/978-3-031-70031-6_1
TUDELA, M. H.; AGUILAR, R.; KIM, S.; NAKAMATSU, J.; SILVA, G.(2024). Development and Characterization of a Printable Concrete Made with Construction and Demolition Waste Aggregates. En RILEM Bookseries . (pp. 3 - 10). Springer Science.
ZAVALETA, D. C.; ÑAÑEZ, R. E.; SILVA, G.; Ruiz, G.; Pando, M.; AGUILAR, R.; NAKAMATSU, J.; KIM, S.(2024). Additive construction using enhanced earthen-based composites: Improvement of the mechanical strength and water durability using chitosan and agave fibers. Construction and Building Materials. Volumen: 411. (pp. 134159). Recuperado de: https://www.sciencedirect.com/science/article/abs/pii/S0950061823038771?via%3Dihub
SILVA, G.; QUISPE, A. R.; BALDOCEDA, J. J.; KIM, S.; Gaby, R.; Miguel, P.; NAKAMATSU, J.; AGUILAR, R.(2024). Additive construction of concrete deep beams using low-cost characterization methods and FEM-based topological optimization. Construction and Building Materials. Volumen: 418. (pp. 135418). Recuperado de: https://www.sciencedirect.com/science/article/abs/pii/S0950061824005592
SILVA, G.; AGUILAR, R.; NAKAMATSU, J.; KIM, S.(2023). Soil-Cement Matrices for Additive Construction: 3D Printing System Validation and Printing Tests. En Soil-Cement Matrices for Additive Construction: 3D Printing System Validation and Printing Tests. (pp. 143 - 150). Trans Tech Publications Ltd .