Búsqueda avanzada

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

Doctor en Ingeniería, PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU

Ver todos los grados

Magíster en Ingeniería Civil (PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU)

Ingeniero Civil
DOCENTE CONTRATADO - CONTRATADO
Docente a tiempo completo (DTC)
Departamento Académico de Ingeniería-Sección Ingeniería de Telecomunicaciones

Sumilla

Investigador postdoctoral en Drexel University (USA) y la Pontificia Universidad Católica del Perú (PUCP). Doctor en Ingeniería y Magíster en Ingeniería Civil por la PUCP. Profesor TPA del Departamento de Ingeniería de la PUCP. Investigador Calificado Renacyt Concytec. El profesor Silva es miembro activo de los grupos de investigación "Ingeniería y Patrimonio" y "Modificación de Materiales". Ponente en conferencias internacionales, autor y revisor de artículos en revistas indexadas. Sus últimos proyectos de investigación se enfocan en la validación de sistemas robóticos para construcción a pequeña y gran escala, y la formulación de matrices cementicias y a base de suelo aptas para manufactura aditiva.

Correo electrónico
  silva.guido@pucp.edu.pe

Publicaciones (23)

Artículos en memoria o anales de congreso (3) | Artículos en revista (17) | Parte o capítulo de libro (3)
ZAVALETA, D. C.; ÑAÑEZ, R. E.; SILVA, G.; Ruiz, G.; Pando, M.; AGUILAR, R.; NAKAMATSU, J.; KIM, S.(2024). Additive construction using enhanced earthen-based composites: Improvement of the mechanical strength and water durability using chitosan and agave fibers. Construction and Building Materials. Volumen: 411. (pp. 134159). Recuperado de: https://www.sciencedirect.com/science/article/abs/pii/S0950061823038771?via%3Dihub
SILVA, G.; BURGOS, M. V.; ÑAÑEZ, R. E.; KIM, S.; Ruiz, G.; Pando, M.; AGUILAR, R.(2023). Soil-Cement Matrices for Additive Construction: 3D Printing System Validation and Printing Tests. En Functional and Engineering Materials. (pp. 143 - 150). Materials Science Forum.
BALDOCEDA, J. J.; SILVA, G.; KIM, S.; Ruiz, G.; Pando, M.; AGUILAR, R.(2023). Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing. En Functional and Engineering Materials. (pp. 161 - 167). Materials Science Forum.
Ver todas las publicaciones

Docencia

Docencia en la PUCP (últimos 2 años)

Pregrado

Facultad de Ciencias e Ingeniería

2CIV04 - TECNOLOGÍA DEL CONCRETO

Semestre 2024

  • 2024-1

Semestre 2023

  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-0
  • 2022-1
  • 2022-2

2CIV07 - MATERIALES DE CONSTRUCCIÓN

Semestre 2024

  • 2024-0
  • 2024-1

Semestre 2023

  • 2023-0
  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-0
  • 2022-1
  • 2022-2

2CIV17 - TRABAJO DE TESIS

Semestre 2024

  • 2024-1

Semestre 2023

  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-1

CIV281 - LABORATORIO DE MATERIALES

Semestre 2023

  • 2023-1
  • 2023-2

Semestre 2022

  • 2022-1
  • 2022-2

TEL140 - TELEMÁTICA FORENSE

Semestre 2023

  • 2023-2

TEL150 - TEMAS AVANZADOS EN REDES Y TELEMÁTICA

Semestre 2024

  • 2024-1

 

Posgrado

Escuela de Posgrado

1CIV12 - SEMINARIO DE TESIS 3

Semestre 2023

  • 2023-2

CIV609 - SEMINARIO DE TESIS 1

Semestre 2023

  • 2023-2

TEL608 - PROYECTO DE TESIS 1

Semestre 2023

  • 2023-2
Ver todos los cursos