Búsqueda avanzada

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

GUIDO LEONARDO SILVA MONDRAGON

Doctor en Ingeniería, PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU

Ver todos los grados

Magíster en Ingeniería Civil (PONTIFICIA UNIVERSIDAD CATOLICA DEL PERU)

Ingeniero Civil
DOCENTE ORDINARIO - ASOCIADO
Docente a tiempo completo (DTC)
Departamento Académico de Ingeniería-Sección Ingeniería de Telecomunicaciones

Publicaciones

Se encontraron 36 publicaciones

SILVA, G.; TUDELA, M. H.; ROJAS, O. A. G.; LLONTOP, C. A.; Perrot, A.; AGUILAR, R.(2026). Printable concrete with multi-source recycled aggregates: particle packing design, rheological behavior, and 3D printing validation. Materials and Structures. Volumen: 59. (pp. 169). Recuperado de: https://doi.org/10.1617/s11527-026-03063-y
ROJAS, O. A. G.; NAKAMATSU, J.; AGUILAR, R.; ÑAÑEZ, R. E.; SILVA, G.; KIM, S.(2026). Improved resistance to water erosion and self-healing capacity of earthen-based 3D printed elements using enzyme-induced carbonate precipitation (EICP). Materials and Structures. Volumen: 59. (pp. 172). Recuperado de: https://link.springer.com/article/10.1617/s11527-026-02971-3
Alvarado, R. A.; Lujan, J. P.; Aguilar, J.; SILVA, G.; de la Torre, J.; Torres, L.(2025). GLOF monitoring system in high mountain: Evaluation of latency data transmission and precipitation influence trough IoT satellite network. En 2025 IEEE Colombian Caribbean Conference (C3). IEEE. Recuperado de: https://ieeexplore.ieee.org/abstract/document/11340060/metrics#metrics
NAKAMATSU, J.; ZAVALETA, D. C.; QUISPE, A. R.; ROJAS, O. A. G.; SILVA, G.; KIM, S.; NAKAMATSU, J.; Ruiz, G.; Pando, M. A.; AGUILAR, R.(2025). 3D-printing of a basic housing unit prototype using earthen-based matrices stabilized with rice husk fibers. Journal of Building Engineering. Volumen: 103. (pp. 112111).
SILVA, G.; QUISPE, A. R.; BALDOCEDA, J. J.; KIM, S.; Gaby, R.; Miguel, P.; NAKAMATSU, J.; AGUILAR, R.(2024). Additive construction of concrete deep beams using low-cost characterization methods and FEM-based topological optimization. Construction and Building Materials. Volumen: 418. (pp. 135418). Recuperado de: https://www.sciencedirect.com/science/article/abs/pii/S0950061824005592
ZAVALETA, D. C.; ÑAÑEZ, R. E.; SILVA, G.; Ruiz, G.; Pando, M.; AGUILAR, R.; NAKAMATSU, J.; KIM, S.(2024). Additive construction using enhanced earthen-based composites: Improvement of the mechanical strength and water durability using chitosan and agave fibers. Construction and Building Materials. Volumen: 411. (pp. 134159). Recuperado de: https://www.sciencedirect.com/science/article/abs/pii/S0950061823038771?via%3Dihub
TUDELA, M. H.; AGUILAR, R.; KIM, S.; NAKAMATSU, J.; SILVA, G.(2024). Development and Characterization of a Printable Concrete Made with Construction and Demolition Waste Aggregates. En RILEM Bookseries . (pp. 3 - 10). Springer Science.
CARDENAS, K. T.; LE BIENVENU, S. M.; DUNKELBERG, C. F.; NAKAMATSU, J.; KIM, S.; Ruiz, G.; Pando, M.; AGUILAR, R.; SILVA, G.(2024). Development and Characterization of a Printable Concrete Made with Construction and Demolition Waste Aggregates. En Fourth RILEM International Conference on Concrete and Digital Fabrication . (pp. 3 - 10). Springer Nature. Recuperado de: https://link.springer.com/chapter/10.1007/978-3-031-70031-6_1